Rated Working Pressure 2600PSI / 180BAR. Fuel Type: Unleaded E10 95 Ron. Hose Length: 20 Meters, H02 Cotton thread tube, OD 11mm, ID 6.3mm, Burst pressure 760 bar.
Max water temperature 60 °C. Fuel Tank Size: 3 Litres. Oil Tank Size: 0.6 Litres.
Water outlet connection: M221.5 male thread, Bore 14. Water Flow: 9.2 Litres Per Minute.
Water inlet connector: M221.5 male threaded, hole 14. Outlet connector: 1/4 copper quick coupling.
Nozzles: 5 pcs (0 degrees, 15 degrees, 25 degrees, 40 degrees, soap). Tool Kit Includes Axle, Axle Nut, Hook, Spark Plug Sleeve, Wrench. Do not attempt to modify the product in any way. To ensure good operating condition arrange regular servicing from an authorising agent. Only use fresh, clean and good quality fuel in the engine.
Never operate the engine without oil, 10W-30 up to 15W-40 oil is to be used. Never refuel in close proximity to naked flames, sparks or other sources of ignition e. Do not refuel when the engine is hot. Wipe up and correctly dispose of any fuel spillage immediately with a suitable medium. Move away from the refuelling areas before restarting the engine. Store fuel for short periods only in a suitable container away from heat and direct sunlight. Clean the pressure washer thoroughly after each use.Regularly check external nuts and fixings to ensure vibration caused by normal use has not begun loosen them. Remove the spark plug ignition lead from the back of the spark plug and position the lead to avoid accidental reconnection. Store the machine in a secure dry location out of reach of children. Empty the fuel tank before storage.
Our company does not bear any responsibility for any damage or breakdown of the machine caused by using a high pressure washer without following all instructions.