Pressure Washer Pump Direct Drive Power Pressure Pump 120bar 1740PSI 5GPM

  
Pressure Washer Pump Direct Drive Power Pressure Pump 120bar 1740PSI 5GPM. The pump is designed and constructed to pump and compress liquids at high pressure in industrial applications. The pumping action is provided by a series of pistons connected to the drive shaft by connecting-rods. The pump is designed and built for incorporation in machinery and plants machinery for washing raw materials, finished products, etc. The pump must be used in a manner appropriate to its technical data (see "Technical Data"), and must not be modified or improperly used. The recommended degree of filtration is 50÷80 mesh. Maximum intake vacuum - 0.25 bar, measured at the pump intake.

The pump operates correctly at an ambient temperature between 10 and 35 °C, with relative humidity of 80%. Power: 5.9hp, 4.4kW. Gross Weight: 7.5kg/ 16.53 lbs. Take all possible precautions to allow the pump to be installed in a safe, risk-free manner. AlI installation phases must be taken into consideration when designing the machinery or plant in which the pump is to be installed.

The design must consider all mounting points, the means of transmission of the energy sources, and the protective and safety devices required by the relevant regulations to prevent the risk of injury. Before start-up, the operator must perform the necessary safety checks. In the event of leaks from the pressurised pipes, stop the pump atonce and remove the cause of the leak. 1 Pressure Washer Pump 1 English Manual All Accessories for Installation. We are not responsible for undeliverable address.

X'mas or other reasons. Your patience is always appreciated. Specification: Model: SJM2014-C24 Material: Brass, Aluminum Process: Black Oxide Assembly Required: Yes Oil Model: SAE15W-40 Flow: 18.5L/min, 5GPM Pressure: 120 bar, 1740psi Power: 5.9hp, 4.4kW Speed: 1450rpm Inlet connector: 1/2'' Outlet connector: 3/8'' Package list: 1 Pressure Washer Pump 1 English Manual All Accessories for Installation.